Fabrication data
Check that the copper, mask, legend, outline and drill exports use the intended origin and units. Identify plated and non-plated holes and ensure dimensions in the mechanical drawing agree with the board outline. Resolve ambiguous slots and cut-outs before releasing files.
Assembly data
Reconcile reference designators and quantities across the BOM, placement file and drawings. Mark do-not-populate positions and component polarity. Identify board-edge handling areas, connector orientation and operations that require separate work instructions.
Test access
Agree on programming connections, test points, power limits and the pass/fail sequence. Inspection of solder joints and functional verification serve different purposes; state the required coverage rather than assuming a general test request specifies it.
Change control
Provide one revision-controlled package and an engineering contact. Record approved changes in the affected source documents and export a new synchronized set. A manufacturing review complements your design validation; it does not replace electrical, safety or regulatory verification.
Project review checklist
| Item | What to include |
|---|---|
| Source documents | Use the current design revision and approved part data |
| Consistency check | Resolve conflicting values before release |
| Manufacturing review | Submit remaining questions with the quotation request |